Need advice about which tool to choose?Ask the StackShare community!

Amazon SNS

1.4K
1.2K
+ 1
18
RabbitMQ

21.1K
18.3K
+ 1
527
Add tool

Amazon SNS vs RabbitMQ: What are the differences?

Amazon SNS is a managed pub/sub messaging service in AWS, while RabbitMQ is an open-source message broker software enabling complex messaging patterns. Let's explore the key differences between them.

  1. Messaging Pattern: SNS follows a publish-subscribe messaging pattern, where messages are published to a topic and then delivered to all subscribed endpoints asynchronously. RabbitMQ follows a queuing pattern, where messages are sent to a queue and then consumed by the consumers when they are ready.

  2. Message Persistence: SNS does not persist messages. Once a message is published, it is not stored for future consumption. RabbitMQ persists messages in queues until they are consumed. This ensures that messages are not lost even if the consumers are not immediately available.

  3. Message Delivery Guarantees: SNS provides at least once delivery guarantee. It ensures that messages are delivered to subscribed endpoints, but there may be duplicates in case of failure or network issues. RabbitMQ provides different delivery guarantees depending on the configuration. It can provide at most once or at least once delivery guarantee based on the acknowledgment settings.

  4. Scaling: SNS can scale up to millions of subscribers and can handle high message throughput. It is designed for massive scale and high availability. RabbitMQ can also handle large message volumes but may require additional configuration and clustering to handle high traffic situations.

  5. Protocol Support: SNS supports multiple protocols such as HTTP, HTTPS, email, SMS, mobile push notifications, and Amazon SQS (Simple Queue Service) as subscribers. RabbitMQ supports various protocols like AMQP (Advanced Message Queuing Protocol), MQTT (Message Queuing Telemetry Transport), and STOMP (Streaming Text Oriented Messaging Protocol).

  6. Managed Service vs Self-Hosted: SNS is a fully managed service provided by AWS. The infrastructure, scaling, and management are handled by AWS, allowing developers to focus on their application logic. RabbitMQ is a self-hosted message broker that requires manual setup, configuration, and maintenance.

In summary, Amazon SNS provides a fully managed solution for message delivery with scalability and ease of setup, whereas RabbitMQ offers more control and customization options for messaging architectures, albeit requiring self-hosting and management.

Advice on Amazon SNS and RabbitMQ
André Almeida
Technology Manager at GS1 Portugal - Codipor · | 5 upvotes · 405.9K views
Needs advice
on
Azure Service BusAzure Service Bus
and
RabbitMQRabbitMQ

Hello dear developers, our company is starting a new project for a new Web App, and we are currently designing the Architecture (we will be using .NET Core). We want to embark on something new, so we are thinking about migrating from a monolithic perspective to a microservices perspective. We wish to containerize those microservices and make them independent from each other. Is it the best way for microservices to communicate with each other via ESB, or is there a new way of doing this? Maybe complementing with an API Gateway? Can you recommend something else different than the two tools I provided?

We want something good for Cost/Benefit; performance should be high too (but not the primary constraint).

Thank you very much in advance :)

See more
Replies (2)

A Pro of Azure Service Bus is reliability and persistence: you can send message when receiver is offline; receiver can read it when it back online. A Cons is costs and message size. You can consider also SignalR

See more
Matt Madzia
Recommends

There are many different messaging frameworks available for IPC use. It's not really a question of how "new" the technology is, but what you need it to do. Azure Service Bus can be a great service to use, but it can also take a lot of effort to administrate and maintain that can make it costly to use unless you need the more advanced features it offers for routing, sequencing, delivery, etc. I would recommend checking out this link to get a basic idea of different messaging architectures. These only cover Azure services, but there are many other solutions that use similar architectural models.

https://docs.microsoft.com/en-us/azure/event-grid/compare-messaging-services

See more
Needs advice
on
KafkaKafkaRabbitMQRabbitMQ
and
RedisRedis

We are going to develop a microservices-based application. It consists of AngularJS, ASP.NET Core, and MSSQL.

We have 3 types of microservices. Emailservice, Filemanagementservice, Filevalidationservice

I am a beginner in microservices. But I have read about RabbitMQ, but come to know that there are Redis and Kafka also in the market. So, I want to know which is best.

See more
Replies (4)
Maheedhar Aluri
Recommends
on
KafkaKafka

Kafka is an Enterprise Messaging Framework whereas Redis is an Enterprise Cache Broker, in-memory database and high performance database.Both are having their own advantages, but they are different in usage and implementation. Now if you are creating microservices check the user consumption volumes, its generating logs, scalability, systems to be integrated and so on. I feel for your scenario initially you can go with KAFKA bu as the throughput, consumption and other factors are scaling then gradually you can add Redis accordingly.

See more
Recommends
on
AngularAngular

I first recommend that you choose Angular over AngularJS if you are starting something new. AngularJs is no longer getting enhancements, but perhaps you meant Angular. Regarding microservices, I recommend considering microservices when you have different development teams for each service that may want to use different programming languages and backend data stores. If it is all the same team, same code language, and same data store I would not use microservices. I might use a message queue, in which case RabbitMQ is a good one. But you may also be able to simply write your own in which you write a record in a table in MSSQL and one of your services reads the record from the table and processes it. The most challenging part of doing it yourself is writing a service that does a good job of reading the queue without reading the same message multiple times or missing a message; and that is where RabbitMQ can help.

See more
Amit Mor
Software Architect at Payoneer · | 3 upvotes · 757.9K views
Recommends
on
KafkaKafka

I think something is missing here and you should consider answering it to yourself. You are building a couple of services. Why are you considering event-sourcing architecture using Message Brokers such as the above? Won't a simple REST service based arch suffice? Read about CQRS and the problems it entails (state vs command impedance for example). Do you need Pub/Sub or Push/Pull? Is queuing of messages enough or would you need querying or filtering of messages before consumption? Also, someone would have to manage these brokers (unless using managed, cloud provider based solution), automate their deployment, someone would need to take care of backups, clustering if needed, disaster recovery, etc. I have a good past experience in terms of manageability/devops of the above options with Kafka and Redis, not so much with RabbitMQ. Both are very performant. But also note that Redis is not a pure message broker (at time of writing) but more of a general purpose in-memory key-value store. Kafka nowadays is much more than a distributed message broker. Long story short. In my taste, you should go with a minialistic approach and try to avoid either of them if you can, especially if your architecture does not fall nicely into event sourcing. If not I'd examine Kafka. If you need more capabilities than I'd consider Redis and use it for all sorts of other things such as a cache.

See more
Recommends
on
NATSNATS

We found that the CNCF landscape is a good advisor when working going into the cloud / microservices space: https://landscape.cncf.io/fullscreen=yes. When choosing a technology one important criteria to me is if it is cloud native or not. Neither Redis, RabbitMQ nor Kafka is cloud native. The try to adapt but will be replaced eventually with technologies that are cloud native.

We have gone with NATS and have never looked back. We haven't spend a single minute on server maintainance in the last year and the setup of a cluster is way too easy. With the new features NATS incorporates now (and the ones still on the roadmap) it is already and will be sooo much mure than Redis, RabbitMQ and Kafka are. It can replace service discovery, load balancing, global multiclusters and failover, etc, etc.

Your thought might be: But I don't need all of that! Well, at the same time it is much more leightweight than Redis, RabbitMQ and especially Kafka.

See more
Needs advice
on
KafkaKafka
and
RabbitMQRabbitMQ

Our backend application is sending some external messages to a third party application at the end of each backend (CRUD) API call (from UI) and these external messages take too much extra time (message building, processing, then sent to the third party and log success/failure), UI application has no concern to these extra third party messages.

So currently we are sending these third party messages by creating a new child thread at end of each REST API call so UI application doesn't wait for these extra third party API calls.

I want to integrate Apache Kafka for these extra third party API calls, so I can also retry on failover third party API calls in a queue(currently third party messages are sending from multiple threads at the same time which uses too much processing and resources) and logging, etc.

Question 1: Is this a use case of a message broker?

Question 2: If it is then Kafka vs RabitMQ which is the better?

See more
Replies (4)
Tarun Batra
Senior Software Developer at Okta · | 7 upvotes · 708.5K views
Recommends
on
RabbitMQRabbitMQ

RabbitMQ is great for queuing and retrying. You can send the requests to your backend which will further queue these requests in RabbitMQ (or Kafka, too). The consumer on the other end can take care of processing . For a detailed analysis, check this blog about choosing between Kafka and RabbitMQ.

See more
Trevor Rydalch
Software Engineer at InsideSales.com · | 6 upvotes · 708.3K views
Recommends
on
RabbitMQRabbitMQ

Well, first off, it's good practice to do as little non-UI work on the foreground thread as possible, regardless of whether the requests take a long time. You don't want the UI thread blocked.

This sounds like a good use case for RabbitMQ. Primarily because you don't need each message processed by more than one consumer. If you wanted to process a single message more than once (say for different purposes), then Apache Kafka would be a much better fit as you can have multiple consumer groups consuming from the same topics independently.

Have your API publish messages containing the data necessary for the third-party request to a Rabbit queue and have consumers reading off there. If it fails, you can either retry immediately, or publish to a deadletter queue where you can reprocess them whenever you want (shovel them back into the regular queue).

See more
Guillaume Maka
Full Stack Web Developer · | 2 upvotes · 707.6K views
Recommends
on
RabbitMQRabbitMQ

As far as I understand, Kafka is a like a persisted event state manager where you can plugin various source of data and transform/query them as event via a stream API. Regarding your use case I will consider using RabbitMQ if your intent is to implement service inter-communication kind of thing. RabbitMQ is a good choice for one-one publisher/subscriber (or consumer) and I think you can also have multiple consumers by configuring a fanout exchange. RabbitMQ provide also message retries, message cancellation, durable queue, message requeue, message ACK....

See more
Recommends
on
RabbitMQRabbitMQ

In my opinion RabbitMQ fits better in your case because you don’t have order in queue. You can process your messages in any order. You don’t need to store the data what you sent. Kafka is a persistent storage like the blockchain. RabbitMQ is a message broker. Kafka is not a good solution for the system with confirmations of the messages delivery.

See more
Needs advice
on
KafkaKafkaRabbitMQRabbitMQ
and
RedisRedis

Hello! [Client sends live video frames -> Server computes and responds the result] Web clients send video frames from their webcam then on the back we need to run them through some algorithm and send the result back as a response. Since everything will need to work in a live mode, we want something fast and also suitable for our case (as everyone needs). Currently, we are considering RabbitMQ for the purpose, but recently I have noticed that there is Redis and Kafka too. Could you please help us choose among them or anything more suitable beyond these guys. I think something similar to our product would be people using their webcam to get Snapchat masks on their faces, and the calculated face points are responded on from the server, then the client-side draw the mask on the user's face. I hope this helps. Thank you!

See more
Replies (3)
Jordi MartĂ­nez
Senior software architect at Bootloader · | 3 upvotes · 657.8K views
Recommends
on
KafkaKafka

For your use case, the tool that fits more is definitely Kafka. RabbitMQ was not invented to handle data streams, but messages. Plenty of them, of course, but individual messages. Redis is an in-memory database, which is what makes it so fast. Redis recently included features to handle data stream, but it cannot best Kafka on this, or at least not yet. Kafka is not also super fast, it also provides lots of features to help create software to handle those streams.

See more
Recommends
on
RabbitMQRabbitMQ

I've used all of them and Kafka is hard to set up and maintain. Mostly is a Java dinosaur that you can set up and. I've used it with Storm but that is another big dinosaur. Redis is mostly for caching. The queue mechanism is not very scalable for multiple processors. Depending on the speed you need to implement on the reliability I would use RabbitMQ. You can store the frames(if they are too big) somewhere else and just have a link to them. Moving data through any of these will increase cost of transportation. With Rabbit, you can always have multiple consumers and check for redundancy. Hope it clears out your thoughts!

See more
Recommends
on
RabbitMQRabbitMQ

For this kind of use case I would recommend either RabbitMQ or Kafka depending on the needs for scaling, redundancy and how you want to design it.

Kafka's true value comes into play when you need to distribute the streaming load over lot's of resources. If you were passing the video frames directly into the queue then you'd probably want to go with Kafka however if you can just pass a pointer to the frames then RabbitMQ should be fine and will be much simpler to run.

Bear in mind too that Kafka is a persistent log, not just a message bus so any data you feed into it is kept available until it expires (which is configurable). This can be useful if you have multiple clients reading from the queue with their own lifecycle but in your case it doesn't sound like that would be necessary. You could also use a RabbitMQ fanout exchange if you need that in the future.

See more
Decisions about Amazon SNS and RabbitMQ
Mickael Alliel
DevOps Engineer at Rookout · | 4 upvotes · 426.9K views

In addition to being a lot cheaper, Google Cloud Pub/Sub allowed us to not worry about maintaining any more infrastructure that needed.

We moved from a self-hosted RabbitMQ over to CloudAMQP and decided that since we use GCP anyway, why not try their managed PubSub?

It is one of the better decisions that we made, and we can just focus about building more important stuff!

See more
Get Advice from developers at your company using StackShare Enterprise. Sign up for StackShare Enterprise.
Learn More
Pros of Amazon SNS
Pros of RabbitMQ
  • 12
    Low cost
  • 6
    Supports multi subscribers
  • 234
    It's fast and it works with good metrics/monitoring
  • 79
    Ease of configuration
  • 59
    I like the admin interface
  • 50
    Easy to set-up and start with
  • 21
    Durable
  • 18
    Intuitive work through python
  • 18
    Standard protocols
  • 10
    Written primarily in Erlang
  • 8
    Simply superb
  • 6
    Completeness of messaging patterns
  • 3
    Scales to 1 million messages per second
  • 3
    Reliable
  • 2
    Distributed
  • 2
    Supports MQTT
  • 2
    Better than most traditional queue based message broker
  • 2
    Supports AMQP
  • 1
    Clusterable
  • 1
    Clear documentation with different scripting language
  • 1
    Great ui
  • 1
    Inubit Integration
  • 1
    Better routing system
  • 1
    High performance
  • 1
    Runs on Open Telecom Platform
  • 1
    Delayed messages
  • 1
    Reliability
  • 1
    Open-source

Sign up to add or upvote prosMake informed product decisions

Cons of Amazon SNS
Cons of RabbitMQ
    Be the first to leave a con
    • 9
      Too complicated cluster/HA config and management
    • 6
      Needs Erlang runtime. Need ops good with Erlang runtime
    • 5
      Configuration must be done first, not by your code
    • 4
      Slow

    Sign up to add or upvote consMake informed product decisions

    - No public GitHub repository available -

    What is Amazon SNS?

    Amazon Simple Notification Service makes it simple and cost-effective to push to mobile devices such as iPhone, iPad, Android, Kindle Fire, and internet connected smart devices, as well as pushing to other distributed services. Besides pushing cloud notifications directly to mobile devices, SNS can also deliver notifications by SMS text message or email, to Simple Queue Service (SQS) queues, or to any HTTP endpoint.

    What is RabbitMQ?

    RabbitMQ gives your applications a common platform to send and receive messages, and your messages a safe place to live until received.

    Need advice about which tool to choose?Ask the StackShare community!

    What companies use Amazon SNS?
    What companies use RabbitMQ?
    See which teams inside your own company are using Amazon SNS or RabbitMQ.
    Sign up for StackShare EnterpriseLearn More

    Sign up to get full access to all the companiesMake informed product decisions

    What tools integrate with Amazon SNS?
    What tools integrate with RabbitMQ?

    Sign up to get full access to all the tool integrationsMake informed product decisions

    Blog Posts

    GitHubPythonNode.js+47
    54
    72275
    GitHubGitDocker+34
    29
    42415
    GitHubDockerAmazon EC2+23
    12
    6559
    JavaScriptGitHubPython+42
    53
    21787
    GitHubPythonSlack+25
    7
    3146
    What are some alternatives to Amazon SNS and RabbitMQ?
    Amazon Pinpoint
    Amazon Pinpoint makes it easy to run targeted campaigns to drive user engagement in mobile apps. Amazon Pinpoint helps you understand user behavior, define which users to target, determine which messages to send, schedule the best time to deliver the messages, and then track the results of your campaign.
    Twilio
    Twilio offers developers a powerful API for phone services to make and receive phone calls, and send and receive text messages. Their product allows programmers to more easily integrate various communication methods into their software and programs.
    Amazon MQ
    Amazon MQ is a managed message broker service for Apache ActiveMQ that makes it easy to set up and operate message brokers in the cloud.
    Google Cloud Messaging
    Google Cloud Messaging (GCM) is a free service that enables developers to send messages between servers and client apps. This includes downstream messages from servers to client apps, and upstream messages from client apps to servers.
    Firebase
    Firebase is a cloud service designed to power real-time, collaborative applications. Simply add the Firebase library to your application to gain access to a shared data structure; any changes you make to that data are automatically synchronized with the Firebase cloud and with other clients within milliseconds.
    See all alternatives