Need advice about which tool to choose?Ask the StackShare community!

IndexedDB

33
97
+ 1
0
MongoDB

93.4K
80.6K
+ 1
4.1K
Add tool

IndexedDB vs MongoDB: What are the differences?

Introduction:

IndexedDB and MongoDB are two popular NoSQL databases that are commonly used in web development. While both databases offer similar functionalities, there are key differences that set them apart. In this article, we will explore and analyze six important differences between IndexedDB and MongoDB.

  1. Data Structure: IndexedDB stores data in a key-value pair format, where each value is associated with a unique key. On the other hand, MongoDB stores data in flexible, JSON-like documents called BSON (Binary JSON), which allows for a more complex and hierarchical data structure.

  2. Scalability: IndexedDB is primarily designed for use in browsers and is suited for small to medium-scale applications. It has a limited storage capacity and is typically used for storing local application data. MongoDB, on the other hand, is built for scalability and can handle large amounts of data with ease. It can be used in both small-scale and enterprise-level applications.

  3. Querying Flexibility: IndexedDB uses a structured query language known as IndexedDB Query Language (IDBQL) for querying data. It provides basic querying capabilities but lacks some advanced features found in other databases. MongoDB, on the other hand, provides a rich querying language with a wide range of operators and functions, allowing for complex and powerful queries.

  4. Data Replication and Sharding: IndexedDB does not support data replication or sharding out of the box. It is primarily designed for local data storage in a single browser. MongoDB, on the other hand, provides built-in support for data replication and sharding, making it a more suitable choice for applications that require high availability and performance.

  5. Transaction Support: IndexedDB supports transactions, allowing multiple operations to be grouped together into a single atomic unit. Transactions help maintain data integrity and consistency. MongoDB also supports transactions but with some limitations. It provides atomicity at a document level, which means operations on multiple documents cannot be grouped into a single transaction.

  6. Open Source vs. Browser-based: IndexedDB is a browser-based database that is implemented as part of the web browser itself. It is supported by most modern browsers and does not require any additional software installation. MongoDB, on the other hand, is an open-source database that can be installed and run on various operating systems and platforms. It provides more flexibility in terms of deployment options.

In summary, IndexedDB and MongoDB differ in their data structure, scalability, querying flexibility, data replication, transaction support, and deployment options. These differences should be considered when choosing a database for a specific use case, based on factors such as data complexity, storage capacity, and scalability requirements.

Advice on IndexedDB and MongoDB
Needs advice
on
MongoDBMongoDB
and
MySQLMySQL

Hello, I am developing a new project with an internal chat between users. Also, there are complex relationships between the other project entities but I wolud like to build something scalable and fast and right now I am designing the data model. What kind of database would you recommend me to manage all application data? relational like MySQL, no relational like MongoDB or a mixed one? Thank you

See more
Replies (6)
Recommends
on
PostgreSQLPostgreSQL

In MongoDB, a write operation is atomic on the level of a single document, so it's harder to deal with consistency without transactions.

See more
Recommends
on
MongoDBMongoDB

MongoDB supports horizontal scaling through Sharding , distributing data across several machines and facilitating high throughput operations with large sets of data. ... Sharding allows you to add additional instances to increase capacity when required

See more
Recommends
on
ArangoDBArangoDB

If you are trying with "complex relationships", give a chance to learn ArangoDB and Graph databases. Its database structures allow doing this with faster and simpler queries. The database is not as strict as others and allows arbitrary data. The data model is really like a neural network and you will never need foreign keys tables anymore. In Udemy there is a free course about it to get started.

See more
Kit Ruparel
Recommends
on
Apache AuroraApache Aurora

The most important question is where are you planning to host? On-premise, or in the cloud.

Particularly if you are planning to host in either AWS or Azure, then your first point of call should be the PaaS (Platform as a Service) databases supplied by these vendors, as you will find yourself requiring a lot less effort to support them, much easier Disaster Recovery options, and also, depending on how PAYG the database is that you use, potentially also much cheaper costs than having a dedicated database server.

Your question regards 'Relational or not' is obviously key, and you need to consider both your required data structure, as well as the ACID requirements of your application model, as well as the non-functional requirements in terms of scalability, resilience, whether you want security authorisation at the highest application tier, or right down to 'row' level in the database, etc. - however please don't fall into the trap of considering 'NoSQL' as being single category. MongoDB, with its document-store type solution is a very different model to key-value-pair stores (like AWS DynamoDB), or column stores (like AWS RedShift) or for more complex data relationships, Entity Graph Stores (like AWS Neptune), to stores designed for tokenisation and text search (ElasticSearch) etc.

Also critical in all this is how many items you believe you need to index by. RDBMS/SQL stores are great for having as many indexes as you want, other than the slow-down in write speed, whereas databases like Amazon DynamoDB provide blisteringly fast read/write performance, but are very limited on key indexing capabilities.

It feels like you have most experience with SQL/RDBMS technologies, so for the simplest learning curve, and if your application fits it, then I'd personally start by looking at AWS Aurora https://aws.amazon.com/rds/aurora/ .

See more
R. Tojo
Recommends
on
MySQLMySQL

I think, Its depend of your project type and your skills. MySQL is good and simple for maintenance but MongoDB need more skills and knowledge. If you work on little project, use MySQL. For your project type, MySQL is enough after you can migrate with PostgreSQL

See more
Daniel Mwakanema
Software Developer at Kuunika - Data for Action · | 2 upvotes · 639.4K views
Recommends
on
MySQLMySQL

FIrstly, it may help if you explain what you mean by "complex relationships between project entities". Secondly, you can build a fast and scalable solution using either. With that said however, the data sounds relational so I would recommend MySQL.

See more
Prithvi Singh
Application Developer at Montaigne Smart Business Solutions · | 8 upvotes · 914.9K views
Needs advice
on
MongoDBMongoDBMySQLMySQL
and
PostgreSQLPostgreSQL

I am going to work on a real estate project and have to decide on a database. Now, SQL databases can be very efficient if appropriately designed. More relations between the data and less redundancy. But with a #NoSQL database, the development time is reduced, and it is easy to query. Since this is my first time working on the real estate domain, I would like to pick a database that would be efficient in the long run.

See more
Replies (4)
Aric Fedida
Founder, CTO at ASK Technologies Inc · | 15 upvotes · 907.1K views
Recommends
on
PostgreSQLPostgreSQL

I recommend PostgreSQL as it’s the most powerful out of the 3 databases you mentioned. It supports JSON objects so you can mimic the MongoDB functionality, but I would also argue that SQL is actually quite powerful and in many cases significantly easier to work with than with NoSQL databases.

Stay away from foreign keys, keep it fast and simple. Define your data structures well in advance. Try to model your data structures based on your system’s vision; based on where it’s going and not based solely on what you currently need it to do. This will help you avoid drastic changes to your database after your system is launched. Populate the database with fake data and run tests. PostgreSQL allows you to create Views from multiple tables. Try to create those views and make sure you can easily create useful views from multiple tables. Run an Explain on those view queries to make sure you created your indexes correctly. Make sure it’s fast!

See more
Matthew Rothstein
Recommends
on
PostgreSQLPostgreSQL

Any of those three databases are going to be efficient, scalable, and reliable in the long term if you configure and use them correctly. They all also have solid hosting solutions.

All things being equal, I would agree with other posters that Postgres is my preference among the three, but there are caveats.

MongoDB and MySQL have better support for mutli-region replication in your big three cloud environments. Azure recently bought Citus Data, which was a best-in-class Postgres replication solution, so they might be the only one I trust to provide cross-region replication at the moment.

If you have a single region deployment and are on AWS, I can't recommend Aurora Postgres highly enough. It's a very good implementation and extremely performant.

See more
Danilo Kaltner
Recommends
on
PostgreSQLPostgreSQL

That really depends of where do you see you application in the long run. On any application, any of those choices are excellent. You could argue about good support on JSON binaries, but even MySQL has an excellent support for that on the latest versions.

On the long run, when your application gets hundreds of thousands of requests per second, you might start thinking about how many inputs you will have in the database compared to the outputs. PostgresSQL it’s excellent at giving you outputs, but table corruption can happen when you start receiving this massive number of inputs (Which was the reason Uber switched from Postgres to MySQL)

On our OPS Platform at CTO.ai , we decided to use Postgres, because we need a reliable and agile way to send the output to our users, so that was out best choice in the long run for our product.

See more
Josh Dzielak
Co-Founder & CTO at Orbit · | 4 upvotes · 902.5K views
Recommends
on
PostgreSQLPostgreSQL

I'll second another piece of advice. Postgresql's JSON columns are a dream when it comes to productivity and I use them frequently with our Rails application. In these cases, no migration is required to change schema. We store payloads with dozens or hundreds of keys and performance has not been an issue. We also have a lot of relational tables, so the joins we get with SQL are very important to us and hard to replicate with a NoQL solution.

See more
Needs advice
on
MongoDBMongoDB
and
PostgreSQLPostgreSQL

I am one of those who believes that MongoDB can be used for everything, this thanks to the advertising of MongoDB.

We are creating an e-commerce platform, we know that it has many relationships, but with MongoDB we can avoid some, but in the end, some relationships have to exist.

A single developer to create two native applications in Flutter, a web application with React, create the backend with multiple microservices hosted with Google Cloud Run. PostgreSQL can be heavy because it should be used with an ORM, on the contrary, with MongoDB you can avoid some relationships and avoid ORM / ODM.

We need advice from someone who has the experience and has had to choose between these two databases for an e-commerce site.

See more
Replies (4)
Recommends
on
PostgreSQLPostgreSQL

The real question here is not about the technology but rather your real needs and your data. Do you need to manage data that has core concepts and relations ? (such as a family, with parents and children) or do you need to manage a basic collection of similar data (such as blog entries)? PostgreSQL is definitely a relational database for managing entities and their relationships whereas MongoDB (I may be strongly opinionated here ;-) ) is more targeted at managing collection of entities (such as the blog entries). For an e-commerce site (with some products, products categories, user ratings and comments, prices, bundles...) I would go for PostgreSQL as it will support/guide you in creating a structured data set with all your products, organized in categories and with user ratings/comments attached to them. HTH

See more
Valeriy Bykanov
Founder, CEO at X1 Group · | 3 upvotes · 628.5K views
Recommends
at

Had exactly the same question when selecting data storage for our new product. Not e-commerce though, rather interactive and content-focused HR SaaS for SME.

The key arguments for PostgreSQL

  • It gives you the opportunity to use relationships where you really need it and just go with key-value tables where you don't.

  • With Jsonb datatype you can store documents/objects/arrays as JSON then use JSON elements in queries and even indexes.

  • There are more tools/integrations working with PostgreSQL which you can use out of the box, e.g. Hasura

See more
Damián Gil
Advisor at Empresa En Crecimiento · | 3 upvotes · 626.9K views
Recommends
on
MongoDBMongoDB

I am in your spot, exactly. A few months ago, I had decided to use Postgres because since its version 9 it showed a lot of progress for being a high-availability database. However, frankly, I didn't want to model statically all data, since I have several distinct schemas (like for different product types) and I wanted some flexibility to add or remove as I saw fit. One of the main challenges with analyzing a NoSQL database being familiar in the SQL ways, is that it's easy to look for "analogies" for what makes SQL useful, like relationship enforcing, transactions and the cascading effect on deletes, updates and inserts, and that limit your vision a lot when analyzing a tool like Mongo, especially in a micro-services pattern. Now-a-days, I really found my solution in Mongo. Not just because of it being NoSQL, but because all of the support I find in the NodeJS community through packages and utilities that make it dead easy to use it for several use-cases. Whatever Postgres offers, Mongo does it a little easier and better, like text search and geo-queries. What you need to see is to model your data in a way that makes sense with Mongo. For instance, I've got a User service that has all auth related information of a user. But then, I have the same user in the Profile service, with the same id, but totally different fields. You have two de facto ways to connect data, by reference and embedding, which in Ecommerce, both have big uses. Like using references to relate a User to a Profile, and an embed to relate a Product to an Order. There's even a third, albeit a little more "manual" implementation here, the graph relationship in which you can model data, in which you can easily model event-driven documents, like a Purchase that goes from "a customer" to "a store", which you can later use for much easier and deep analytics than with the classical SQL stance. MariaDB has it readily available, and also has many improvements over MySQL and Postgres, especially for NoSQL features and scalability. Sadly it is just seen as a MySQL clone, but it offers more than that (although its documentation could be improved). Using Mongo in a micro-service environment is even better because your models can be smaller, meaning less burden on relationships, although you do compensate with a bit of duplication, but a well-designed schema will have minimal impact on that. Whatever tool might do the job, but I want to cheer on the newer generation. Hope it helps.

See more
Needs advice
on
MongoDBMongoDBMySQLMySQL
and
PostgreSQLPostgreSQL

Hello,

I am trying to design an online ordering app similar to Doordash or Uber Eats. I'm having a hard time trying to finalise on what database (or mixture of databases) to use. I'm leaning towards using a relational database like MySQL or PostgreSQL. But, when the application grows, I don't want to join on 20 tables to get a data. Any help would be greatly appreciated. Thank you for your time.

See more
Replies (2)
Rupen Makhecha
Recommends
on
MySQLMySQL

Hello Suhas , We build our product www.voilacabs.com which is in the same lines as yours but we have used a combination of Mysql and MongoDB. When using MySQL, i would recommend doing the following: 1. Use Mysql only for storage only and for realtime updates we recommend MongoDB. 2. Don't try to Join more than 3 tables. ( the moment you reach 3 join stop there and try to un-normalized database. 3. Never or very rarely use Auto-increments. ( we recommend using UUIDS ) . Use UUIDS always for Auto increments for MYSQL. If you using Postgre SQL then i would suggest you to please check this https://instagram-engineering.com/sharding-ids-at-instagram-1cf5a71e5a5c There is a stored procedure that generated unique keys instead of auto-increment keys and that will help you sharding or clustering database without sync errors. 4. Also For MongoDB if you can put a layer of REDIS Cache then that will boost your api performance under large loads. 5. Use Node.js programing language as that function asynchronously .

Let me know if you still need any suggestion's . Thanks & Regards Rupen Makhecha CTO @ Voila Cab's www.voilacabs.com

See more
Rafey Iqbal Rahman
Recommends
on
MySQLMySQL
at

I would recommend a mixture of MySQL and MongoDB. Using MongoDB for the Content Distribution Network (CDN) will make it easy to store high volume incoming data. MySQL is recommended to be used for business logic. PostgreSQL is not recommended since you will be faced with inefficient database replication features and constant migration from one PostgreSQL version to another.

See more
Needs advice
on
IndexedDBIndexedDBMongoDBMongoDB
and
PostgreSQLPostgreSQL

I'm currently developing an app that ranks trending stuff ( such as games, memes or movies, etc. ) or events in a particular country or region. Here are the specs: My app does not require registration and requires cookies and localStorage to track users. Users can add new entries to each trending category provided that their country of origin is recorded in cookies. If each category contains more than 100 items then the oldest items get deleted. The question is: what kind of database should I use for managing this app? Thanks in advance

See more
Replies (1)
Recommends
on
MongoDBMongoDB

I think your best and cheapest choice is going to be MongoDB, Although Postgres is probably going to be the more scaleable approach, you likely have a good idea of how you want to present your data, and the app seems small enough that you shouldn't need to worry about scaling issues. It also sounds like your app can grow in a linear capacity based on the number of users, and the amount of data, which is the perfect use-case for noSQL databases (linear, predictable scaling).

Correct me if I have any of these assumptions wrong. 1. You're looking to have a relatively high-read with a lower write volume 2. Your app is essentially a list of objects that can belong to a category 3. users can create objects in this list.

I think Mongo is going to be what you're looking for on the following basis: 1. you absolutely need a database that is shared by all users of your app, therefor IndexedDB is out of the question. 2. You have semi-structured data 3. you probably want the cheapest solution.

I think Postgres is wrong for the following reasons: 1. your app is pretty simple in concept, SQL databases will add unnecessary complexity to your system, either through ORMs or SQL queries. (use an ORM if you go with SQL) 2. Hosting SQL databases for production is not cheap! the cheapest solution I know of for Postgres is ElephantSQL. It provides 20MB for free with 5 concurrent connections, you should be okay to manage these limitations if you decide to go Postgres in the end. Whereas mongoDB Atlas has some great free-tier options.

Although your data might be easier to model in Postgres, you can certainly model your data as a single list of items that have a category attached.

I don't want to officially recommend another tool, but you should really checkout prisma, firebase, amplify, or Azure App Services for this app! Just go completely backend-less [Firebase] https://firebase.google.com/ [Amplify] https://aws.amazon.com/amplify/ [Prisma] https://www.prisma.io/ [Azure App Services] https://azure.microsoft.com/en-us/services/app-service/?v=18.51

See more
Needs advice
on
MongoDBMongoDB
and
PostgreSQLPostgreSQL

Hi everybody, I'm developing an application to be used in a gym setting where athletes fill out a health survey, and coaches can analyze the results. However, due to the dynamic nature of some aspects of the app and more static aspects of the other, I am wondering if/how I would integrate MongoDB with my existing PostgreSQL database. I would like to store things like registrations, license information, and club information in Postgres, while I am thinking about moving things like user surveys, logging, and user settings information over to MongoDB. Some fields on the survey are integers, some large blocks of text, and some are arrays. My thought is, if I moved that data to MongoDB, it would give us greater flexibility in terms of adding and removing fields and data to them, and it would scale a lot easier than Postgres. Not to mention it will be easier to organize that kind of data. Is that overkill or am I approaching this issue the right way? Thank you!

See more
Replies (4)
Brian Ploetz
Recommends
on
PostgreSQLPostgreSQL

You can have your cake and eat it too. If you really need the flexibility of a document store, Postgresql's JSONB support allows you to mix and match relational data and document data within the same database/table. You can just as easily run analytical queries against JSONB data in Postgresql as you can against "normal" relational data. MongoDB comes with a significant operational overhead and cost (hello replica sets), so unless you really need MongoDB's sharding capabilities (which you shouldn't until you get to extreme scaling numbers), then just stick with Postgresql and use JSONB where you need it.

See more
Recommends
on
MongoDBMongoDB

With PostgreSQL you could easily integrate JSON or array type columns and develope a simple interface to add columns on your application. Anyway handling all the data this way will require some intermediate skill with PostgreSQL dialect and a mix and match of syntaxes for your analitical queryes. Also you will need to have a good design for you backend to handle all this. MongoDB will handle all this in a more natural way and I believe will be more easily integrated with a Node.js backend.

See more
Max Musing
Founder & CEO at BaseDash · | 4 upvotes · 431.4K views
Recommends
on
PostgreSQLPostgreSQL
at

How are you managing your PostgreSQL schema? It doesn't have to be hard to add or remove fields. We're working on a SQL database client at BaseDash that lets you add/remove columns in a couple clicks.

If you decide to migrate some of your data to MongoDB, you can definitely manage the two databases in parallel. For any records that need to be linked, you can treat it just like a foreign key by creating a column that points to an ID in the other database. For example, you might store user settings in MongoDB, and include a UserId field that points to your User record in your Postgres database.

See more
Recommends
on
PostgreSQLPostgreSQL

Those types of things should fit fine in a postgres json column. You'll actually have more flexibility with postgres because you can have a field as a normal column or in a json column, and you can have constraints and indexes on fields within a json column (or not).

See more
Needs advice
on
InfluxDBInfluxDBMongoDBMongoDB
and
TimescaleDBTimescaleDB

We are building an IOT service with heavy write throughput and fewer reads (we need downsampling records). We prefer to have good reliability when comes to data and prefer to have data retention based on policies.

So, we are looking for what is the best underlying DB for ingesting a lot of data and do queries easily

See more
Replies (3)
Yaron Lavi
Recommends
on
PostgreSQLPostgreSQL

We had a similar challenge. We started with DynamoDB, Timescale, and even InfluxDB and Mongo - to eventually settle with PostgreSQL. Assuming the inbound data pipeline in queued (for example, Kinesis/Kafka -> S3 -> and some Lambda functions), PostgreSQL gave us a We had a similar challenge. We started with DynamoDB, Timescale and even InfluxDB and Mongo - to eventually settle with PostgreSQL. Assuming the inbound data pipeline in queued (for example, Kinesis/Kafka -> S3 -> and some Lambda functions), PostgreSQL gave us better performance by far.

See more
Recommends
on
DruidDruid

Druid is amazing for this use case and is a cloud-native solution that can be deployed on any cloud infrastructure or on Kubernetes. - Easy to scale horizontally - Column Oriented Database - SQL to query data - Streaming and Batch Ingestion - Native search indexes It has feature to work as TimeSeriesDB, Datawarehouse, and has Time-optimized partitioning.

See more
Ankit Malik
Software Developer at CloudCover · | 3 upvotes · 349.1K views
Recommends
on
Google BigQueryGoogle BigQuery

if you want to find a serverless solution with capability of a lot of storage and SQL kind of capability then google bigquery is the best solution for that.

See more
Needs advice
on
CouchbaseCouchbase
and
MongoDBMongoDB

We Have thousands of .pdf docs generated from the same form but with lots of variability. We need to extract data from open text and more important - from tables inside the docs. The output of Couchbase/Mongo will be one row per document for backend processing. ADOBE renders the tables in an unusable form.

See more
Replies (3)
Petr Havlicek
Freelancer at havlicekpetr.cz · | 12 upvotes · 216.4K views
Recommends
on
MongoDBMongoDB

I prefer MongoDB due to own experience with migration of old archive of pdf and meta-data to a new “archive”. The biggest advantage is speed of filters output - a new archive is way faster and reliable then the old one - but also the the easy programming of MongoDB with many code snippets and examples available. I have no personal experience so far with Couchbase. From the architecture point of view both options are OK - go for the one you like.

See more
Ivan Begtin
Founder - Dateno, Director - NGO "Informational Culture" / Ambassador - OKFN Armenia at Infoculture · | 7 upvotes · 216.5K views
Recommends
on
ArangoDBArangoDB

I would like to suggest MongoDB or ArangoDB (can't choose both, so ArangoDB). MongoDB is more mature, but ArangoDB is more interesting if you will need to bring graph database ideas to solution. For example if some data or some documents are interlinked, then probably ArangoDB is a best solution.

To process tables we used Abbyy software stack. It's great on table extraction.

See more
OtkudznamDamir Radinović-Lukić
Recommends
on
LinuxLinux

If you can select text with mouse drag in PDF. Use pdftotext it is fast! You can install it on server with command "apt-get install poppler-utils". Use it like "pdftotext -layout /path-to-your-file". In same folder it will make text file with line by line content. There is few classes on git stacks that you can use, also.

See more
George Krachtopoulos
Needs advice
on
MongoDBMongoDB
and
PostgreSQLPostgreSQL

Hello everyone,

Well, I want to build a large-scale project, but I do not know which ORDBMS to choose. The app should handle real-time operations, not chatting, but things like future scheduling or reminders. It should be also really secure, fast and easy to use. And last but not least, should I use them both. I mean PostgreSQL with Python / Django and MongoDB with Node.js? Or would it be better to use PostgreSQL with Node.js?

*The project is going to use React for the front-end and GraphQL is going to be used for the API.

Thank you all. Any answer or advice would be really helpful!

See more
Replies (11)
Arnaud Assad
Code Alchemist at DOOLTA · | 23 upvotes · 317K views
Recommends
on
PostgreSQLPostgreSQL

If you want safety (no data corruption/loss) Postgresql is the way to go. You can use Postgresql with python/django but also node. And as a bonus postgresql performance should match those of mongodb if properly tuned...

See more
JT Turner
Lean Software Programmer · | 12 upvotes · 317K views
Recommends
on
PostgreSQLPostgreSQL

I mean what you use really comes down to your team. I would normally pick a relationship database over an object store for reporting and other things down the road that are much harder to do with a DB like MongoDB. As for language, I would pick Elixir as it does these things really well but that because that is what I know best. Python or Node.js are also sure good choices. Whoever is building should probably pick the language, framework, and database.

See more
Mikael Sand
CTO at Seaber.io at Seaber.io · | 5 upvotes · 314.3K views
Recommends
on
PostgreSQLPostgreSQL

I'd recommend using PostgreSQL and the built in row level security it offers. You can easily make multi-tenant real-time systems using it and https://www.graphile.org/postgraphile/ which gives you an GraphQL api guaranteed to be in sync with your database for free. Also, the transactional support in postgres shines in comparison to mongodb.

See more
Ivan Begtin
Founder - Dateno, Director - NGO "Informational Culture" / Ambassador - OKFN Armenia at Infoculture · | 4 upvotes · 314.4K views
Recommends
on
PostgreSQLPostgreSQL

If you have a lot of realtime operations and not-so-high variability of data so Postgres is the best choice. MongoDB is less suitable for high-performance projects but is good for semi-structured data and not-realtime projects. For example we use MongoDB as DB for analytics but we use Postgres for any high-load projects

See more
Nikhil Gurnani
Sr. Backend Engineer at Grappus · | 4 upvotes · 314.2K views
Recommends
on
PostgreSQLPostgreSQL

I think the point of difference is very clear in the sense that if you're looking to manage relationships in your application, you might as well do it with a database designed and architected to do so. MongoDB is great, but managing complex relationships becomes application logic which introduces more technical debt, in my personal opinion. No matter what programming language you end up using (Postgres works well with both Python and Node.js), you should also look up how easy it will be to manage code and database designs once you begin development. Hope this helps you!

See more
Václav Hodek
CEO, lead developer at Localazy · | 4 upvotes · 314.3K views
Recommends
on
PostgreSQLPostgreSQL

At Localazy, we have decided for PostgreSQL, because with its JSONB data type, it effectively combines both relational and document store. The relational model is still better in many situations. In combination with ACID transactions and other features, it provides you with something you are not about to get with Mongo. The ability to store JSONB gives you flexibility where you need it. Also, the SQL queries are something great and allow you to unload a lot of logic to the database server.

See more
Recommends
on
HasuraHasura

We build a Factoring-Software for a company in germany and realied on PostgreSQL as main banking and transactional database. Works flawlessly. It's very fast, realiable and well documented. It's a very good product.

My advice for your current needs would be to take a look at https://hasura.io/. I like the service and the fact that it's open source, too. It shippes with PostgreSQL database and gives you the power to map your database relations to a GrapQL endpoint. GraphQL works really well with a React frontend. Hasura getting started docs are well written and they also provide nice use-case and hands-down coding tutorials to get you started. Check if it matches your needs. Here are the features: https://hasura.io/all-features Here is their tutorial to kick it off: https://hasura.io/learn/graphql/hasura/introduction/ Here's an article about scaling their service for GraphQLto 1 million active subscriptions (live queries): https://hasura.io/blog/1-million-active-graphql-subscriptions/

Have a nice day! Cheers, Chris

See more
John Akhilomen
Recommends
on
PostgreSQLPostgreSQL

I'd have recommended MongoDB, but since you're considering Security, then PostgreSQL it is. PostgreSQL is also easy to use, stable, good documentation, and huge support community out there. PostgreSQL also handles concurrency well..

See more
Matthew Rothstein
Recommends
on
PostgreSQLPostgreSQL

Unless you have need for consensus writes or cross-region replication, I generally prefer Postgres over Mongo.

You can use Postgres with either language and it can be performant if you use an RDBMS or are thoughtful about your query construction.

Given your need for security, I'd definitely interact with the database through a mature RDBMS and use well-vetted frameworks and consider going through a rigorous security evaluation every so often.

I personally think that Postgres is easier to reason about than Mongo because of its relational nature and comfort with constraints. Maintaining any sort of relational features in Mongo tends to require a lot of application code for features Postgres offers out of the box.

See more
Mahdi Perfect
Recommends
on
PostgreSQLPostgreSQL

Postgres have never disappointed me. I wouldn't choose MongoDb unless I've had strong reasons to choose it.

See more
Divyansh Sharma
Data Scientist at Compound Analytics · | 2 upvotes · 314.2K views
Recommends
on
PostgreSQLPostgreSQL

I have been using this stack of PostgreSQL and Python/Django for a large scale project and I am happy with my decision of using this stack as it is easily scalable , quick and secure.

See more
Decisions about IndexedDB and MongoDB
Omran Jamal
CTO & Co-founder at Bonton Connect · | 4 upvotes · 553.8K views

We actually use both Mongo and SQL databases in production. Mongo excels in both speed and developer friendliness when it comes to geospatial data and queries on the geospatial data, but we also like ACID compliance hence most of our other data (except on-site logs) are stored in a SQL Database (MariaDB for now)

See more
Kyle Harrison
Web Application Developer at Fortinet · | 11 upvotes · 973.5K views

MySQL has a lot of strengths working for it. It's simple and easy to set up and use. It's JSON engine is also really good these days. Mongo is also simple to setup and use, and it's speed as a document-object storage engine is first class.

Where Postgres has both beat is in it's combining of all of the features that make both MySQL and Mongo great, while adding on enterprise grade level scalability and replication. It's Postgres' stability and robustness, while still fulfilling the roles of it's contemporaries extremely well that edge Postgre for me.

See more

When I was new with web development, I was using PHP for backend and MySQL for database. But after improving my JS skills, I chosen Node.js. Because of too many reasons including npm, express, community, fast coding and etc. MongoDB is so good for using with Node.js. If your JS skills are enough good, I recommend to migrate to Node.js and MongoDB.

See more
Chose
MongoDBMongoDB
over
MySQLMySQL

My data was inherently hierarchical, but there was not enough content in each level of the hierarchy to justify a relational DB (SQL) with a one-to-many approach. It was also far easier to share data between the frontend (Angular), backend (Node.js) and DB (MongoDB) as they all pass around JSON natively. This allowed me to skip the translation layer from relational to hierarchical. You do need to think about correct indexes in MongoDB, and make sure the objects have finite size. For instance, an object in your DB shouldn't have a property which is an array that grows over time, without limit. In addition, I did use MySQL for other types of data, such as a catalog of products which (a) has a lot of data, (b) flat and not hierarchical, (c) needed very fast queries.

See more

We used Mongo for the first iterations of our app, but the relational nature of our data was an awkward fit for a database that is not relational. We sorely lacked relational database integrity features that needed to be done on the application side (poorly) and it was a huge relief when we managed to port our application over to Postgres, which performs great and never gives us trouble, while having very user friendly extensions like JSON and PubSub that made the transition easy.

See more

We wanted a JSON datastore that could save the state of our bioinformatics visualizations without destructive normalization. As a leading NoSQL data storage technology, MongoDB has been a perfect fit for our needs. Plus it's open source, and has an enterprise SLA scale-out path, with support of hosted solutions like Atlas. Mongo has been an absolute champ. So much so that SQL and Oracle have begun shipping JSON column types as a new feature for their databases. And when Fast Healthcare Interoperability Resources (FHIR) announced support for JSON, we basically had our FHIR datalake technology.

See more

In the field of bioinformatics, we regularly work with hierarchical and unstructured document data. Unstructured text data from PDFs, image data from radiographs, phylogenetic trees and cladograms, network graphs, streaming ECG data... none of it fits into a traditional SQL database particularly well. As such, we prefer to use document oriented databases.

MongoDB is probably the oldest component in our stack besides Javascript, having been in it for over 5 years. At the time, we were looking for a technology that could simply cache our data visualization state (stored in JSON) in a database as-is without any destructive normalization. MongoDB was the perfect tool; and has been exceeding expectations ever since.

Trivia fact: some of the earliest electronic medical records (EMRs) used a document oriented database called MUMPS as early as the 1960s, prior to the invention of SQL. MUMPS is still in use today in systems like Epic and VistA, and stores upwards of 40% of all medical records at hospitals. So, we saw MongoDB as something as a 21st century version of the MUMPS database.

See more
Manage your open source components, licenses, and vulnerabilities
Learn More
Pros of IndexedDB
Pros of MongoDB
    Be the first to leave a pro
    • 827
      Document-oriented storage
    • 593
      No sql
    • 553
      Ease of use
    • 464
      Fast
    • 410
      High performance
    • 255
      Free
    • 218
      Open source
    • 180
      Flexible
    • 145
      Replication & high availability
    • 112
      Easy to maintain
    • 42
      Querying
    • 39
      Easy scalability
    • 38
      Auto-sharding
    • 37
      High availability
    • 31
      Map/reduce
    • 27
      Document database
    • 25
      Easy setup
    • 25
      Full index support
    • 16
      Reliable
    • 15
      Fast in-place updates
    • 14
      Agile programming, flexible, fast
    • 12
      No database migrations
    • 8
      Easy integration with Node.Js
    • 8
      Enterprise
    • 6
      Enterprise Support
    • 5
      Great NoSQL DB
    • 4
      Support for many languages through different drivers
    • 3
      Schemaless
    • 3
      Aggregation Framework
    • 3
      Drivers support is good
    • 2
      Fast
    • 2
      Managed service
    • 2
      Easy to Scale
    • 2
      Awesome
    • 2
      Consistent
    • 1
      Good GUI
    • 1
      Acid Compliant

    Sign up to add or upvote prosMake informed product decisions

    Cons of IndexedDB
    Cons of MongoDB
      Be the first to leave a con
      • 6
        Very slowly for connected models that require joins
      • 3
        Not acid compliant
      • 2
        Proprietary query language

      Sign up to add or upvote consMake informed product decisions

      - No public GitHub repository available -

      What is IndexedDB?

      This API uses indexes to enable high-performance searches of this data. While Web Storage is useful for storing smaller amounts of data, it is less useful for storing larger amounts of structured data.

      What is MongoDB?

      MongoDB stores data in JSON-like documents that can vary in structure, offering a dynamic, flexible schema. MongoDB was also designed for high availability and scalability, with built-in replication and auto-sharding.

      Need advice about which tool to choose?Ask the StackShare community!

      What companies use IndexedDB?
      What companies use MongoDB?
      Manage your open source components, licenses, and vulnerabilities
      Learn More

      Sign up to get full access to all the companiesMake informed product decisions

      What tools integrate with IndexedDB?
      What tools integrate with MongoDB?

      Sign up to get full access to all the tool integrationsMake informed product decisions

      Blog Posts

      Dec 8 2020 at 5:50PM

      DigitalOcean

      GitHubMySQLPostgreSQL+11
      3
      2436
      JavaScriptGitHubNode.js+29
      14
      13623
      GitGitHubDocker+34
      29
      42670
      GitGitHubSlack+30
      27
      18666
      What are some alternatives to IndexedDB and MongoDB?
      SQLite
      SQLite is an embedded SQL database engine. Unlike most other SQL databases, SQLite does not have a separate server process. SQLite reads and writes directly to ordinary disk files. A complete SQL database with multiple tables, indices, triggers, and views, is contained in a single disk file.
      Pouchdb
      PouchDB enables applications to store data locally while offline, then synchronize it with CouchDB and compatible servers when the application is back online, keeping the user's data in sync no matter where they next login.
      Redis
      Redis is an open source (BSD licensed), in-memory data structure store, used as a database, cache, and message broker. Redis provides data structures such as strings, hashes, lists, sets, sorted sets with range queries, bitmaps, hyperloglogs, geospatial indexes, and streams.
      CouchDB
      Apache CouchDB is a database that uses JSON for documents, JavaScript for MapReduce indexes, and regular HTTP for its API. CouchDB is a database that completely embraces the web. Store your data with JSON documents. Access your documents and query your indexes with your web browser, via HTTP. Index, combine, and transform your documents with JavaScript.
      MySQL
      The MySQL software delivers a very fast, multi-threaded, multi-user, and robust SQL (Structured Query Language) database server. MySQL Server is intended for mission-critical, heavy-load production systems as well as for embedding into mass-deployed software.
      See all alternatives